Scottbez SplitFlap Display CR-80 Card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Version of the CR-80 Card needed for Scottbez's splitflap display.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 1
- Views
- 226
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
I have designed a simple CR-80 card for Scottbez's splitflap display. I designed these parts using the size of the CR-80 card and the size of the hole punch needed to make these if you were using actual CR-80 cards.
The github for the display: https://github.com/scottbez1/splitflap
The prusables link for the module itself: https://www.printables.com/model/430122-split-flap-module-hardware-components
You will need to print:
44 - CR-80 Half Cards
4 - Axle Body: https://www.printables.com/model/430122-split-flap-module-hardware-components
2 - Top and Bottom: https://www.printables.com/model/430122-split-flap-module-hardware-components
1 - Of Every other file at: https://www.printables.com/model/430122-split-flap-module-hardware-components
I printed all these parts with a horizontal expansion compensation of -0.1mm and a hole horizontal expansion compensation of 0.1mm at 0.25mm layer height.