1 / 5
Linkable Towel Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Ocean Waves Linkable Towel Rack.
This was designed for rolled towels, and can be linked to as many as you would like. I used wall anchors and screws for added support/strength.
My Print Settings: Keep in mind, I printed with a 0.8mm nozzle. Your settings should be adjusted accordingly if you're using a 0.4mm nozzle.
Nozzle: 0.8mm
Layer Height: 0.4mm
Walls: 2 (Outside to Inside)
Supports: None
Infill: 20%
This print uses ~60g of filament 100% scale with the settings mentioned above.
Thanks for checking out my designs!