Benchtop ATX tabletop adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: benchtop_mount_0.2mm_PLA__53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.86 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 53.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Basic insulation for benchtop adapter
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 20
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A variant in the design to be able to put benchtop adapter on a table top and have some insulation.
V 1.1 Using NopSCADlib hanging_hole for better printing M3 nut traps.
Hardware Required
* 4x m3 10mm bolt
* 4x m3 nut
Libraries used in .scad file can be found at – https://github.com/avolkov/openscad-designs/tree/master/benchtop-mount along with the up-to-date source file of the model.