TinyMight 2 - stem cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This TinyMight 2 end cap will block the odors coming from your stem. Uses TM2 spare o-ring. Fits both stems.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 74
- Makes
- 0
- Views
- 454
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
0.16 layer height recommended.
The tolerances are quite tight - hopefully they work for your printer.
But if not, you can copy and modify this CAD project: https://cad.onshape.com/documents/2ece09fa20b0f89300a13527/w/d7c97470a4a118c67a7d3c9f/e/c5e2350ed016f4f60dbf8a7e
Check the base sketch and modify the inner ring diameter (defaults to 11.9) to set the desired dimension. Recommend changing it by ~0.1
Optionally check the oring sketch and modify the distance from the center of o-ring to the outer wall (0.3 by default).