1 / 4
Radiomaster MT12 Joystick Housing for LiPo users
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
in the original design the joystick won't fit if you use a LiPo battery in your MT12 radio
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 678
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like to use otherwise unused LiPo batteries w/ the MT12 radio. Unfortunately the original joystick module won't fit, so… I made this version.
Printing
The design is not optimized for FDM printers because I wanted to print it in resin anyway. It came out quite nice and robust in Sunlu ABS–like black resin on my Saturn 3 ultra. Find chitubox project file (as zip) and a pre–supported STL in the downloads.
For FDM I'd recommend PETG and a print orientation that keeps all the supports on the inside of the housing.