BB-MP9 MINI (Prop/Cosplay)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scaled down submachine gun prop, heavily inspired by the MP9.
- Rating
- 0 / 5
- Likes
- 91
- Downloads
- 338
- Makes
- 0
- Views
- 2,065
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
BB-MP9 MINI:
The BB-MP9 is a prop gun for cosplay or display purposes. Heavily inspired by the Brugger & Thomet MP9 submachine gun, but with some obvious differences. This was just a quick model I made for fun, while working on a more difficult project so I will most likely not be updating it any further.
Features:
- Folding Stock.
- Working Magazine Release.
- Spring Loaded Trigger and Bolt.
Recommended Filament Type: PLA+ or PETG
- Foregrip Sleeve must be printed in TPU or it will not be able to fit onto the foregrip frame.
Required Hardware:
8 x M3*6 bolt
2 x M3*10 bolt
1 x M3*12 bolt
4 x M3*15 bolt
2 x Pen Springs (1 for the trigger and the other for the magazine release)
1 x Compression Spring: OD: 10mm, WD: 0.8mm, Length: 50mm