1 / 4
Prusa Mk3s PSU reinforced Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Prusa Mk3s PSU bracket is designed to replace the black Prusa PSU
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 269
- Makes
- 5
- Views
- 1,626
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Replacing the black PSU is easy.
Installation of the bracket:
Parts you need:
2x … M4 nuts
2x … M4x12mm screws
2x … M3 washers
2x … M3x10mm screws
At first you have to insert 2 M4 nuts into the two hex holes on the vertical side of the bracket.
Secure the bracket to the frame with two M4x12mm screws. Finally secure the bottom part with two M3x10mm screws (don´t forget to use the two M3 washers).
Then the replacement should look like the following picture:
Have fun with this part!
Print settings i used:
PETG
0.4 nozzle
0.2 layer height
40% infill
wall line count 4