1 / 4
Drawer Latch for Baby Proofing / Security - Slim, stick or screw on, easy print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drawer latch for keeping little fingers out. Can be stuck or screwed on.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 111
- Makes
- 1
- Views
- 782
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Should be pretty self explanatory.
Mount using good double sided tape or two screws per piece.
The tab is fine being mounted using tape, but I've had mixed results with the latch part - I recommend using two small screws if possible to mount it to the drawer front.
The little aligning notch on the tab part helps to place it at the front of the drawer, but if you're using thick tape to put it on instead of screws, then you can align that piece flat on the bed and cut off the notch for better/easier printing.