1 / 2
K1 MAX Cartographer cable guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed guide to the existing lidar cable. Requires: Removing the extruder motor cover 1xM3x8 or M3x10 for mounting.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 111
- Makes
- 0
- Views
- 2,246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A printed cable guide to the existing lidar cable for stress relief on the cable.
Requirements:
- Removing the extruder motor cover
- 1xM3x8 or M3x10 for mounting into existing extruder motor mounts.
--------------------------------------------------------------------------------------------------------
How to get some extra cable:
- Unplug the lidar sensor from the hotend motherboard.
- Flip the printer around and cut the cabletie holding the lidar cable.
- The cable can now (with a bit of force) be pulled out revealing a few extra centimeters of cable.
Does it work without the lidar cable?
- Yes, it still works without the cable from the lidar - the included USB cable from the cartographer can still be used.
Link to install guide: