Jig for bending components & jumpers for 0.1" breadboard/Veroboard
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.54 – €0.66 net (excluding VAT)
For file: Jumper Jig.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.60 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I frequently use Veroboard and breadboards to build projects. Both use 0.1" spacing
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 180
- Makes
- 3
- Views
- 983
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and his OpenSCAD file was modified for this posting.
I've included 2 versions, one with a single color print, and one for a 2 color print.
This was printed on a Prusa XL, 0.2mm layer height, PLA, 0.4mm nozzle, no supports needed.