1 / 2
Yet Another Chunky Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a chunky bracket I made to hold up a shelf under my vanity.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a little bracket I made to hold up a shelf that's attached to a small square leg. I didn't like any of the other brackets I saw so I made my own.
Best printed with a stronger material such as PETG, ASA, or ABS. I used 2 8 x ¾ wood screws to attach it. The screw openings are 5mm so be sure to use something with a head larger than that.
Print settings:
Supports: No
Brim: Doesn't matter
Layer Height: .3
Infill: 30% Gyroid
Material: Sunlu PETG