Customizable Shoe Wall Storage Hangers [mounted-from-the-back-edition]

Intro:

Finally you can hang your dirty shoes from the wall in a nice way!

With this model i tried to hang the shoes on the wall without clamping or indenting the front part of the shoe or waste to much space on the wall. So the hook reaches into the shoe just like your foot would and holds it up right. They are mounted from the back with M3 screws and M3 inserts.

And because i like customization, every hanger can be “redesigned” in Prusa Slicer by removing the top and bottom solid layers and change the infill type and percentages.

Printing instructions:

• General:
  • PLA
  • 0,6 mm Nozzle
  • 0,3 mm Layer Height
• Inserts:
  • For the area around the inserts i strengthened the parts with a local infill modifier. This is especially important when you use a small number of perimeters. The modifiers are already included in the print files down below.
  • Example for infill modifyer settings:
    • Infill Hook:        15%
    • Infill Mofifier:  50%
  • Mount the inserts with a normal soldering iron
• Customization:
  • customize the infill type and percentage of the parts to your desire. Feel free to post them in here.
• Open walls and Customization:
  • in Prusa Slicer go to Print Settings > Layers and Perimeters > Solid Layers and set both to 0
  • customize the infill type and percentage of the parts to your desire.

Feel free to post your custom prints in here.

Tools/Materials used:

• Fusion 360
• a good old caliper
• Filament:
  • PRUSAMENT - 1,75 mm PLA - Galaxy Black
• Soldering iron
• Inserts: M3x5,7 from the following Link

• https://www.amazon.de/gp/product/B08BCRZZS3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1