Customizable clothes hook [mounted-from-the-back-edition]
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.26 – €0.32 net (excluding VAT)
For file: clothes hook single__Metr_Cubic_open_sides_0.6n_0.3mm_PLA_MINI_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 13.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a clean looking customizable clothes hook. Mounting is done by M3 inserts from the back.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 369
- Makes
- 7
- Views
- 2,131
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Intro:
These are some simple hook for your wardrobe. They are mounted from the back with M3 inserts and screws.
For customization every hanger can be “redesigned” in Prusa Slicer by removing the top and bottom solid layers and change the infill type and percentages.
Printing instructions:
- General:
- PLA
- 0,6 mm Nozzle
- 0,3 mm Layer Height
- Inserts:
- For the area around the inserts i strengthened the parts with a local infill modifier. This is especially important when you use a small number of perimeters. The modifyers are already included in the print files down below.
- Example for infill modifier settings:
- Infill Hook: 15%
- Infill Mofifier: 50%
- Mount the inserts with a normal soldering iron
- Customization:
- customize the infill type and percentage of the parts to your desire. Feel free to post them in here.
- Open walls and Customization:
- in Prusa Slicer go to Print Settings > Layers and Perimeters > Solid Layers and set both to 0
- customize the infill type and percentage of the parts to your desire.
Feel free to post your custom prints in here.
Tools/Materials used:
- Fusion 360
- a good old caliper
- Filament:
- PRUSAMENT - 1,75 mm PLA - Galaxy Black
- Soldering iron
- Inserts: M3x5,7 from the following Link
- https://www.amazon.de/gp/product/B08BCRZZS3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1