Knife holder Ikea UPPDATERA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular knife holder for Ikea UPPDATERA. Requires 4x M3 contersunk screws to assemble.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Designed to hold ~12 knives with <150x20mm blade. Requires some space above the UPPDATERA - my drawer has about 65mm, works perfectly.
Print the holder two times and the support once, flattest face on the bed (=support upside down). Holder has adhesion tabs to prevent warping. 4x M3 contersunk 12-16mm screws are needed to assemble, I used metric, wood-screw will probably work as well.
Printed on MK3S+, PETG, .30 DRAFT Prusa Slicer setting, 2 perimeters (default), no supports.
Do not forget to paint seam at the back of the holder so it does not end up in the front :)