1 / 5
HX Stomp XL Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
easy-to-print stand for the HX Stomp XL that lift it 3cm on the back...
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 83
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
A small stand for your Line6 HX Stomp XL. It lifts the effectboard 3 cm on the back for a precise foot-switch-orgy. If you want, you can get yourself some anti-slippery-sticker with 10mm on the ground, the shapes for that a there…
Print the 3 parts without support (should fit together on the most printer beds) and put the together. No glue needed.
Have fun printing - and playing!
______________________________
Print settings:
filament: PLA (110g) is okay and durable
supports: no
infill: 10 %
walls: 3
brims: recomended
print time: 2h 30min