Multiboard Push-fit VESA Bracket and Raspberry Pi 7" Display Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.28 – €2.78 net (excluding VAT)
For file: multiboard_vesa_0.2_0.4n_0.2mm_PLA_MK4IS_1h42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.53 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 1.7 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This will allow people to wall-mount screens and computers using multiboard
- Rating
- 4 / 5
- Likes
- 33
- Downloads
- 137
- Makes
- 2
- Views
- 2,010
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
These models use the “Push connect” fitting type from Multiboard to wall-mount the Raspberry Pi 7" touchscreen (the one with the bolt-holes) and any VESA-compatible mini-PC.
The mounts work with M3 socket cap screws - the display requires 6 (2 M3x18, 4 M3x25) screws to fully assemble, and will thread the plastic. The VESA bracket will depend on which form factor but should bolt on through.
Pretty much any print settings will work, 15% defaults are no issue. It will need the medium size push fit just like a Multiboard shelf (DS Snaps, threads all work).