1 / 3
Hueforge Picard facepalm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge Picard facepalm
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 46
- Makes
- 1
- Views
- 547
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA JAYO Gray Transmission Distance: 2.5
PLA GEETECH Gray Transmission Distance: 3
PLA JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.