1 / 3
3 inch Spacer Installation Tool for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C — image 1
1 / 3

3 inch Spacer Installation Tool for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Helps you to install Govee lights at a consistent and recommended distance from your wall for a professional look

Rating
5 / 5
Likes
21
Downloads
308
Makes
1
Views
1,348
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

There are two versions of this tool provided:

  • v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is.
  • v2 Slim Edition - After feedback from my brother who did the vast majority of installation using v1, he noted that the tool could be improved if the sides were thinner. In cases where the light is spanning a gap or the adhesive is not effective at all, v2 can be used to hold the light in place while you install a clip closer to the light compared to v1. This version uses less material and prints faster but it may not be as easy to hold and use in most circumstances, and it may not be as likely to survive a fall from a ladder.

Instructions for use:

Thoroughly clean and dry the surface your light will be affixed to, peel the adhesive cover sheet from a light and use the tool to space your lights at a consistent 3 inches from your wall for a professional look. Apply firm and even pressure to the light and remove the tool. Install a screw clip on each side of the light for a permanent installation. If you need more clips you can check out my design here on printables which was specifically designed for mass production of a large number of clips.

The FreeCAD .FCStd files are provided if you would like to change the dimensions or design of whatever you want. The step files are also provided if your slicer supports step files for better resolution.

My design is free for individuals to use for their own personal non-commercial usage. If you like my design and find it useful, a contribution made through Ko-fi or PayPal would be greatly appreciated!

Thanks for checking out my design and good luck on your project!