1 / 5
Sealing Clip Holder - Embedded Magnets (Ikea Bevara)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetically mountable sealed clip organizer/holder
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 163
- Makes
- 7
- Views
- 1,833
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is easy to remix as sufficient tolerances are there to add or remove material without breaking the design.
Dimensions for the pocket for the embedded magnets : 6.2 mm x 12.8 mm x 12.8 mm
Printing:
You will need to configure the print to automatically pause before the hole for the embedded magnets are closed up. This can be easily achieved with the prusa slicer and most popular softwares.
Use infill ≤10 percent to keep the weight low.