Original enclosure LSC camera support
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.01 – €1.23 net (excluding VAT)
For file: camerasupport_0.4n_0.2mm_PLA_MK4IS_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 49.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
simple LSC camera support
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 82
- Makes
- 0
- Views
- 946
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
mounts in the corner of the enclosure
height and position are adjustible the support fits all the holes in the profiles
up side down orientation is also possible
camera is secured with one m6 bolt
look closely to the position of the plexiglass before printing. mirroring of the part might be needed.