Zero G Mercury one.1 for Sovol SV05 Bottompanel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
printable bottom panel for an SV05 convertion
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 70
- Makes
- 0
- Views
- 827
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 4 panels fit on a 220x220 heatbed and the outside holes fit to the original sideskirt heat inserts. Even with the connectors on the inside fits the panel flawless.
To screw everything together i melted m3 heatinsert in the 5 connectors. For the build i bought the voron style ones, so i used them here too. It fits good and works like it should.
You have to print the 4 panels, 4 big connectors and 1 small connector.
I used PETG. If the PETG starts melting, you have a bigger problem than the bottom panels. =)
Infill, wall, bottom- and toplayers depends on how stiff you want it. To keep it simple i used the same parameter like the rest of the build.