Owlet Cam 2 Universal Bracket - Flat Back
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Owlet Cam 2 Wall Bracket to 1/4-20 screw thread (same as GoPro and Tripod's
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 131
- Makes
- 0
- Views
- 895
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a bracket which takes the existing holes on the mounting bracket of the Owlet Cam 2 Baby Monitor and makes it compatible with the universal mount of 1/4-20 screw thread, as used with GoPro's and Camera Tripods. This is so you can use the Owlet Cam 2 with a portable stand, instead of the wall mounting kit that the device comes with.
Portable stand I use is this one: Amazon UK Link - https://www.amazon.co.uk/dp/B0C8B1VRFS?psc=1&ref=ppx_yo2ov_dt_b_product_details
This can be used with a threaded insert, or 3M tape depending on your application requirements. If using 3M tape, you might want to rough up the back surface first with sandpaper for better adhesion.
Print Settings
Infill: 35%
Infill Type: Gyroid
Layer Height: 0.16mm (Or 0.20mm Strength if using Bambu Studio)
Parts List
If you are using it as intended, you will need to grab yourself the following parts:
1/4 - 20 Threaded Inserts (Amazon UK Link - https://www.amazon.co.uk/dp/B07LBR4ZZX?psc=1&ref=ppx_yo2ov_dt_b_product_details )
Heat Set Insert Tips (Amazon UK Link - https://www.amazon.co.uk/dp/B0C7RN3NQ1?psc=1&ref=ppx_yo2ov_dt_b_product_details )