1 / 2
Blade Holder Attachment for 3/4" PVC Pipe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach this to a 3/4" PVC Pipe and a single edge razor blade to make an algae scraper that can be as long as needed
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 45
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Attach this to a 3/4" PVC Pipe and a single edge razor blade to make an algae scraper that can be as long as needed.
Printing in PETG or ABS is best for use in water but PLA would work fine. No supports should be needed. I do 3-4 perimeters for strength and infill isn't super important (15% - Adaptive Cubic).
The piece should work as a pressure fit on the end of the pipe but you can glue it as well.