Wallplate for 3 keystones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small, wallplate-mounted module with space for 3 keystones. I used it to get 3 ethernet jacks on my wall.
- Rating
- 4.667 / 5
- Likes
- 20
- Downloads
- 107
- Makes
- 3
- Views
- 801
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a wall plate-mounted, keystone box for 3 keystones in a vertical position. I originally wanted to use these wall plates, but unfortunately the cable box behind the wall plate isn't deep enough to handle the keystones + rj45 connector + cable bend, so I had to make my own.
The final result sticks out from the wall about 3cm (1.2 inches). There are 3 prints to make, and all you need to install are regular wall plate screws. The other two pieces slide into place.
I printed these on a Prusa MK4 in both PLA and PETG with no supports.