Magnifying Glass Frame
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.67 – €0.82 net (excluding VAT)
For file: Glass Holder v2_0.4n_0.15mm_PETG_MK4IS_45m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.75 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 45 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A frame to hold a magnifying glass for a hobby helping hands tool.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A frame to hold a magnifying glass for a hobby helping hands tool. The original metal frame became worn and no longer stayed in the treaded receptacle. I recommend using supports on everything. I had to use a caliper to estimate all measurements. I used Fusion 360 to draw the screw portion…you may have to adjust.