1 / 1
HueForge Gambit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Prusament Black Transmission Distance: 0.3
PLA Geeetch Silk Magenta Transmission Distance: 5
PLA Hatchbox Grey Transmission Distance: 1
PLA Hatchbox White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta
At layer #12 (1.04mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.