Sherpa Mini Mount for Flsun Q5 Universal v6 Effector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sherpa mini mount for Flsun Q5 Universal v6 Effector, replaces Flsun_Q5_Effector_v6_clamp.stl
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reccomend printing in ABS/ASA if printer is enclosed, PETG should be OK for non enclosed printers.
0.2mm layer height
50% infill (cubic or gyroid)
You will need a short length of PTFE tube between the exit of the Sherpa Mini extruder and the hotend
2x M3 heat inserts for screws to mount Sherpa Mini
Ignore the Canbus Board in photos, thats another project currently working on.
Note this adds significant weight to the toolhead, highly reccomend making sure belts are correclty tightened before installing and that there is no play in the arm bearings
Highly reccomend using my remix of the effector plate for added rigidity to cope with the added stress this extra weight adds to the toolhead. Original version from thingiverse had too much flex and was causing print surface artefacts and inconsitent first layers.
https://www.printables.com/model/759003-flsun-q5-universal-v6-effector-remix
.step and .f3d files included should you wish to ammend