Fire TV & other remotes stand / holder station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
nearly every remote & smartphone should fit because i contructed the holes much more bigger so everything is a bit loose
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 150
- Makes
- 0
- Views
- 743
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
slicing recommendations:
-0.2 to 0.3 layer height
-2 walls and “print thin walls” or Arachne Walls ON(!)
-0-15% Gyroid infill (if you use <10% infill i recommend 5-6 top layers)
-BRIDGing ON!! (lower down the "minimum bridge wall length" in cura)
-supports only if you want but not necessary when bridging is on
construction file (Microsoft 3D Builder/3mf) with thicker outer walls included so you can customize a bit if you want:)
sorry for the strings on the cover photo → this was wet PETG and a broken nozzle…