Spare cap for bottles Sencor SBL Smooothie mixer, Wilfa Activlife blender, etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cap for Sencor SBB bottles 005SS, 006GG, 007VT (SBL smoothie blenders). Suitable for Wilfa Activlife SPB-1.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
Since all our Sencor SBB bottles and thermoses (005SS, 006GG, 007VT) for the Sencor SBL Smoothie Blender have a broken cap (probably a bad design) and the replacement bottle is quite expensive, I have designed a replacement. The cap is also suitable for Wilfa Activlife SPB-1 and similar bottles.
I recommend printing in a temperature resistant material so that the bottles can be washed in the dishwasher. I used Spectrum PETG HT100 and DevilDesign ASA.
Printing for strength with 4 perimeters, 50% infill. I recommend using a brim.
You can use a seal from an old cap. If you've lost it, you can print a replacement from TPE or TPU, or use any seal measuring 25mm x 18.6mm x 2.4mm (outer x inner diameter x height). I have attached a model of the gasket.
--------------------------------------------------------------------------------------------------------------
Protože u všech našich lahví a termosek Sencor SBB (005SS, 006GG, 007VT) ke Smoothie mixéru Sencor SBL prasklo víčko (asi špatná konstrukce) a náhradní lahev je dost drahá, vymodeloval jsem víčko náhradní. Víčko je vhodné též pro lahve Wilfa Activlife SPB-1 a další podobné.
Doporučuji tisk z teplotně odolného materiálu, aby se daly víčka mýt v myčce. Já jsem použil Spectrum PETG HT100 a DevilDesign ASA.
Tisk z důvodu pevnosti se 4 perimetry, 50% výplň. Doporučuji použít límec.
Do víčka lze použít těsnění ze starého víčka. Pokud jste ho ztratili, můžete si vytisknout z TPE nebo TPU náhradní, nebo použijte jakékoliv těsnění o rozměrech 25 mm x 18.6 mm x 2.4 mm (vnější x vnitřní průměr x výška). Model těsnění jsem přiložil.
