Adapter for CURAPROX Interdental Brush on Oral-B Electric Toothbrush
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.34 – €0.42 net (excluding VAT)
For file: oralprox_0.2mm_PETG_MK3SMMU2S_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 31.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This adapter allows you to install CURAPROX interdental brushes on an Oral-B electric toothbrush.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This is designed to print without supports up to a maximum layer height of 0.2mm. I printed on PETG with a 0.4mm nozzle.
Note that the model has a notch marker to indicate the front side. This is important when connecting the adapter with the electric toothbrush since the shaft of an Oral-B toothbrush is not fully symmetric and unlike with a traditional brush the front side is otherwise not obvious on this adapter.
Whether using an interdental brush rotating is a good idea from a medical point of view is something you should discuss with your dentist. You would use this adapter at your own risk. If you are a dentist I would be happy to hear your opinion in the comments.