1 / 3
Grizzly G0490X jointer 6" dust port — image 1
1 / 3

Grizzly G0490X jointer 6" dust port

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Grizzly G0490X 8" jointer comes with a 4" dust port; this is a 6" version.

Rating
0 / 5
Likes
9
Downloads
70
Makes
1
Views
362
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

The Grizzly G0490X 8" jointer comes with a 4" dust port and that is all that is commercially available.

I designed this 6" version to fit in place of the stock one (including the reliefs for the nutserts that the screws go into).

I printed this in PETG on a Prusa XL but PLA is plenty strong.  The specific settings that I used for a successful print in my cold basement are:

MUST BE SCALED BY 2540.  I designed in an old version of AutoCAD.

30% infill, 5mm brim inside and outside.  I used the smart fill feature to put supports only on the screw holes 

Tags