Huawei Honor band 6 adapter connector 华为荣耀手环6适配连接器
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Huawei Honor band 6 adapter connector 华为荣耀手环6适配连接器
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 1
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Perfectly fits the original buckle dust cover, and the suitable straps are Casio LA-201W, LA-200 and other 14mm straps (I installed the 201w strap).The connector opening size is 14.6mm.
I use petg printing, other materials should work just fine
It is recommended that the printing direction is as shown in the picture, and the support is set to be generated only on the printing platform (or use support interception like me)
After checking that the size is appropriate, I use 120, 600, and 800 sandpaper to polish it to a smooth matte texture (do not polish the surface that is in contact with the watch! Unless it is too tight)
Enjoy your new watch strap!
完美适配原厂卡扣防尘盖,适配表带为卡西欧LA-201W、LA-200等14mm表带(我安装的是201w的表带),连接器开口尺寸为14.6mm。
我使用petg打印,其他材料应该工作
建议打印方向如图所示,设置支撑只在打印平台上生成(或者像我这样使用支撑拦截)
检查尺寸合适后,我使用120、600、800砂纸打磨出光滑哑光质感(不要打磨与手表接触的面!除非太紧)
享受你的新表带!