Samsung Galaxy Pro 5/6 Watch Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of beautiful, functional stand swapping 5mm nuts for 1/4" nuts
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 354
- Makes
- 2
- Views
- 2,595
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing: For added weight/balance, add a box-shaped ‘modifier’ with 100% infill in the slicer to cover just the base and the initial vertical offshoot of the arm.
Print on the side with slot-facing down
Post-processing: Remove the 4-tabs with a blade to allow the cord to fit in the slot.
I added pieces of cutoff ¼" threaded-rod that I put into the center of each nut to add extra weight/density – and then used a grinder to smoot it off. This is NOT necessary but I assumed couldn't hurt to add extra ballast.
For added assurance, I added a drop of superglue before pushing the nuts into the slots