1 / 1
Razer Core X Vertical Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical stand for the Razer Core X eGPU
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 95
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Vertical stand for the Razer Core X.
Printing Options:
- Full - for those with a large print bed
- Half - for those with a small print bed
1. Full
BOM:
- 1x
Full.stl(PLA or stronger) - 4x
Foot.stl(TPU***) - CA glue
Assembly:
Print 1x of Full.stl. Glue feet onto bottom of stand.
2. Half
BOM:
- 2x
Half.stl(PLA or stronger) - 4x
Foot.stl(TPU***) - 4x 196mm (L) x 8mm (D) rod (I used wooden dowels)
- Glue/epoxy (for dowels/joining halves)
- CA Glue (for feet)
Assembly:
Apply glue to holes in each half, add dowels, combine halves, clamp. Glue feet onto bottom of stand.
***If you do not have TPU for the feet, you can print 1x Foot.stl to use as a template to cut feet out of some sort of anti-slip adhesive.