Aluminum Tube Substitute for Filament Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or…
- Rating
- 5 / 5
- Likes
- 121
- Downloads
- 1,107
- Makes
- 8
- Views
- 5,196
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials.
For the instructions on the PrusaPrinters blog from some time ago there was an article for how to make a nice drybox that can also mount onto the top of their v2 enclosure. One of the steps mentioned to cut the aluminum tubes provided with a MMU2 upgrade to a length of 100 mm. I didn't want to do this because of a fear of being inaccurate with the cuts or needing the original size again - and I couldn't find any real option to buy if I hadn't done it right.
I made a 3D model you can print (with PETG or any similar material, although I used PLA and it has been working fine so far) as a substitute for the aluminum rod. It might not be as strong but it gets the job done. :)
Enjoy!