1 / 1
Vultures 1 ¥$ Kanye West
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The newest album is here!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 801
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
AMS ready but if you want you can print on a single color printer by doing the following filament swaps:
Set the layer height to 0.08mm and a base layer of 0.16mm, only one wall and infill to 100% then:
For the white mask one:
- Start with black
- Swap to orange at layer 5(0.48mm)
- Swap to white at layer 14(1.20mm)
For the blackmask one:
- Start with black
- Swap to orange at layer 5(0.48mm)
- Swap to white at layer 17(1.44mm)
Ironing is active but adds some time to the print, they come out amazing even with no ironing so it's on you!
Happy printing and don't forget to show your creations!