Voron 2.4 Y Endstop Relocation Low Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile Y endstop using the open fastener locations, for non-gantry umbilical mount.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 584
- Makes
- 7
- Views
- 3,085
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Description:
My Voron 2.4 uses a Nighthawk SB toolhead board with an upper umbilical mount at the vent location. Due to the cable thickness and exit direction from the board, the loop from the board to the lower strain relief mount either needs to be bent quite tightly or have extra room to comfortably home without a risk of brushing/pinching.
This mount places the switch far to the right, cuts back the front face, and is low-profile to give more room for the cable loop. Ideally is also used with a Z chain mount transposition.
Parts:
2x M3x8 mm Socket Head Screws
Print Settings:
0.4 mm nozzle, 0.2 mm layer lines, 40% infill