Liquid Stands KSA7575 microphone adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to fit KSA7575 mic mount into Liquid Stands Z style Keyboard stand tube.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
I bought the KSA7575 On-Stage microphone mount without realizing it was too small to fit the tubing on the Liquid Stands Z style keyboard stand. Created this small adapter for a secure fit. I printed with 100% infill, but this was probably overkill.
Printed in PLA, I'm sure PETG or anything else would work, it's not exactly a complicated design.
For test fits, disable scale lock and shrink the height down to about 10mm - this will let you make sure it's going to go in the tube before you spend an hour printing the real thing.
It was a tight fit to get the mount into the adapter. I suggest putting the adapter on the mount before sliding it into the frame.
The notch is to accommodate the recessed threads in the tube for the headphone hook. In the photo it's not a flush fit, but I measured the difference and updated the model before uploading. It should be pretty, pretty, pretty close.
Rock on~