Box for Fibaro FGS222 Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In order to protect my Fibaro FGS222 module from the dust I designed and 3D printed a box
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design:
I wanted to protect my Fibaro FGS222 module from the dust as it's located inside dry wall.
I started from the model Casing for Fibaro dimmer and junction block from Mario M and adapted it to my module and need.
The hole for the antenna has also been relocated as it wasn't compatible with the original model.
The cover is just clipped. So no glue or screw needed
Printing instructions:
Nothing special regarding printing instructions. I used default PrusaSlicer parameter with 0.1mm layer height to have a better accuracy at the level of the clips (Cover and box)
Printed in Prusament PETG Jet Black, other material as PLA can also be used
Next step is to do the same for my Chacon DIO modules
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d file so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs