1 / 1
Toothpicks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toothpicks and box I printed these with a 0.4mm nozzle and 0.20mm layer height and they work really well. They are…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 26
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Toothpicks and box
I printed these with a 0.4mm nozzle and 0.20mm layer height and they work really well. They are quite as good as wooden sticks and they do not break while you are using them.
The box takes 6 x 5 = 30 toothpicks in a small convenient size. The lid is reasonably tight and may need sanding for a good fit.
Print Settings
Rafts:
No
Supports:
No
0.20 layer height
Infill:
20%
Filament:
. PLA .
Category: Household Supplies