Peak Design Capture camera peg board mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to hang a camera with a Peak Design Capture plate screwed onto it on a pegboard
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Adapter to hang a camera with a Peak Design Capture plate screwed onto it on a pegboard*.
The start of getting my photo gear onto a tool pegboard for easy access.
Since the Capture plate is symmetrical, the camera can be put in any of the four directions. But if you have a heavy lench attached I'd recommend hanging it lens down. Without a lens attached the camera body goes sideways very smoothly.
Print it standing in the same orientation as it's supposed to be attached to the pegboard. It has a slightly slanted bottom mostly to make the peg print better without supports (don't use supports for this model, you really should not need them)
* Designed for Biltema pegboard with 12mm hole pitch and 3.6mm hole diameter (https://www.biltema.se/verktyg/verktygsforvaring/verktygstavlor/verktygstavla-400-x-400-mm-svart-2000045761). But that can be changed easily. The original FreeCAD file is attached here.