1 / 9
Dragonstaff spikes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU printed Dragonstaff Spiral Claws
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 92
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
My initial draft of TPU printed dragonstaff spiral spikes. Dependent on the infill, the spikes are harder or softer. I used 25% infill and its perfect for practise in our flat.
The base/mount for the staff is for 22mm diameter staffs. If you need other dimensions, please write me.
You need HEAT-SET INSERTS for the inner holes and a bunch of M3/M5 screws.
My dragonstaff weight is 750g in total for a 160cm carbon staff. (22mm X 2mm)
Printed on a elegoo neptune 3 pro printer with amazon basics TPU.