SILVERCREST handheld vacuum pump adaptor for ZWILLING vacuum storage products
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.48 net (excluding VAT)
For file: ZWILLING x SILVERCREST adaptor v2_0.4n_0.2mm_PETG_MK4IS_24m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 23.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adaptor for SILVERCREST handheld vacuum pump for ZWILLING vacuum product line (FRESH & SAVE Storage)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.
SILVERCREST Vacuum pump model: SILVERCREST SHV 12,5 A1
I printed in PETG
- Infill: 15%
- Layer Height: 0.20mm
- Supports: No
Other parts needed
- Rubber O-ring (Size ID: 27,8mm X OD: 35mm X CS: 3,6mm)
If you like my work consider