EBB36 VZBOT VZ235 VZ330 MOUNT - NEW BEACON DUCT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BTT V1.2 MOUNT
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 456
- Makes
- 2
- Views
- 2,631
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
HI,
I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads.
It is designed for:
BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).
What you will need:
- some m3 screws;
- nylon m3 nuts x2
- heat inserts m3; 5mm
- 3mm alu to cut spacer for dacing man - or just print attached adapter.
I highly recommed to print all parts from ABS…
Adapter is needed to make more room for ebb36. not much space will left but everything fits perfectly. Wires like heater - please connect before.
im adding redesigned fan duct - no supports required, longer, with more room for Cartographer3D probe connector.
Positioner will help you to mount straight DM - not required.
im adding also new cable holder - but it will not fit to vz235 without modification. my top lid is higher than default.
