HSW Bit storage boxes / trays / drawers. Tileable along both axis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure, tileable, bit storage boxes/trays/drawers for small things like screws, nuts, bolts.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 104
- Makes
- 1
- Views
- 836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Made for honeycomb storage wall. This design is 1 wide and 2 units tall. It tiles nicely in both directions and is designed as a small bit holding solution.
The shelves/boxes fit into the outer box at a 5 degree angle so they won't vibrate or accidentally fall out.
The outer bit box has a ceiling that can lead to some overhangs. You can support it if you like, or print the overhang region with a 0.1 mm layer height for minimal bridging issues. The shelf that fits in has a 1.5 mm clearance at the top to allow for some roof drooping even without any cleanup. You can also print the outer box on it's ‘back’ with supports which will put the only potential ugly bits on the back. This leads to some post processing to remove the supports, but gives a nice box.
There is a lip on the drawer designed so that you can add text in the slicer if desired.
If people like it, I can pretty easily make a smaller 1x1 box or larger boxes as well.