1 / 3
AEA SF .30 Cal (7.62mm) Single Shot Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
.30 Cal (7.62mm) Single Shot Tray for AEA SF (may fit HF Models as well)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 63
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
.30 Cal (7.62mm) Single Shot Tray for AEA SF
It should also fit the HP variant rifles.
Print laying down on its back side (the completely flat side) for the best finish on the pellet trough.
I printed mine in PLA at 0.2mm layer height with 4 perimeters and 15% gyroid infill. It is a simple geometric part, so other settings would probably work as well.
