1 / 1
Drillguide 2020 Endcap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use it for holes at the end of a 2020 extrusion to accept a 4mm allen key to tighten a ISO 7380 screw, which holds another 2020 extrusion perpendicular right to the end for a nice corner.
PETG used, slicer settings are: 50% infill, 4 Perimeter, 5 layers on top and bottom. Layerheight 0.2mm, nozzle 0.4mm. Requires around 12 gr Filament.