1 / 1
Hearthstone Lanyard Charm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of GoldXD's Hearthstone model for the standard BlizzCon lanyard.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 48
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This is a minor remix that I hope to be handing out to folks at the next BlizzCon! A simple scale down and an opening to thread a lanyard through, should be a super simple print.
Lanyard opening is 3.5mm x 20mm, so the normal lanyard we get at BlizzCon will fitt.
The print in the photo was printed on the Prusa XL with 2 toolheads:
- Polymaker Marble PLA
- Polymaker Dual-Color Blue-Silver Silk PLA
On the XL, with organic supports, I can print 70 of these at a time. Questionable if I need the supports, but I like to be sure of a good print.