1 / 4
*V2* 100% Printable Clamp - Not only for Nipples! :)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPDATED: V2 of the 100% printable clamp.
- Rating
- 4.333 / 5
- Likes
- 215
- Downloads
- 2,730
- Makes
- 8
- Views
- 13,401
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
After the initial version garnered significant popularity, I have now taken the opportunity to update and enhance the 100% printable clamp.
What's new?
- Reinforced design
- Simplified thread for easier printing
- Reduced total length
How to print?
- Clamp - Seam position: Random.
- Print at a moderate speed (for the thread).
- Enable 'Elephant Foot Reduction' for the initial layer.
- Chooce PETG over PLA on the clamp.
- There are 2 body-versions and various clamps - you only need 1 of each.
Are you experiencing issues with the thread?
- Attempt to print the threadnut approximately 4-5% larger in the X and Y dimensions.
- Heat the threadnut slightly with a lighter, then screw on the bolt.
- Use a knife or file to clean the thread.
Verify the positioning:
Take a look at the different designs of the clamps.