Gemini Joe Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
(mini) Gemini Joe
In an alternative history timeline NASA developed the Gemini Joe to test various features of the Gemini capsule and service module. This is what it might look like.
This model is a miniature of a larger high powered project. Go to this link for more details Gemini Joe on Facebook
The Gemini Capsule is actually capable of being a shot glass and is held onto the mount using a eyebolt with a 3/8 nut that expands the top of the mount to hold the capsule in place.
The entire airframe is printed - the decal sheet wraps perfectly around the upper body.
You will need 70mm length of BT-20 liner for the motor mount.
You can glue the fins into place, but they're designed to be removeable in case one should break, just push the filament pin out and the fin will come off.
If you have a multi-color printer, the capsule can be separated into color elements.
Flies well on a Quest D12-4 - probably would fly on a C but haven't tried yet.
